Timber Cooling Tower

Wooden Cooling Tower

Our wooden cooling tower has following features:

• Designed for maximum service life, dependability and performance.
• Readily adaptable for Industrial processes, D. G. Sets and Air conditioning.
• Maximum resistance against very hot temperatures and water borne contaminants.
• Consumes minimum power due to high efficiency F.R.P Axial Flow Fans.

Structure :
The structure of the cooling tower will be made from the best grade of pinewood pressure impregnated by chromate copper arsenate to prevent it from any bacterial attack.it is bolted and designed for 30pounds/sq. feet. Wind load efficiency.

Fans
Our cooling towers are fitted with FRP Axial Flow fans with Aerodynamic efficiency and significant saving in higher operating cost.

Fan Blades
Fan Blades are made up of fibre glass reinforced epoxy resins. These blades are hollow in construction and have been designed with most efficient aero foil section.

Optimum aero foil section thickness has been selected to achieve maximum lift and minimum drag coefficient. Twist is so designed that blade section are maintained at most efficient angle of attack having the highest lift drag ratio. Light and strong blades increase the life of mechanical drive arrangement.

Hub Assembly
Fan hub assembly is simply designed for easy installation and minimum maintenance. It is dynamically balanced and made of stainless steel plates, aluminum clamp blocks, cast iron bush and all hardware in stainless steel for resistance against corrosion.

Balancing of Fans
Fan Hub assemblies are dynamically balanced on Dynamic Balancing Machines and total Fan Blade assemblies are balanced on specially designed rig for vibration free continuous operation.

Fan Drive
Fans are directly driven by electric motors in small models and coupled through gearbox in larger models subject to the tip speed of the fan.

Fan Cylinder
Our cooling towers are fitted with elevated fan cylinders in HDG Steel or FRP material which enhance the air movement, completely eliminating the chances of re-circulation of exhaust air and thereby increasing cooling tower efficiency.

Hot Water Distribution System
The Hot Water Distribution System is of open Gravity type and is constructed from boiling water proof marine plywood with poly-propylene target nozzles.

Louvers and Casing
Corrugated asbestos cement board casing is applied vertically joints are lapped and sealed for water tightness. Corners are covered with FRP corner rolls. Corrugated asbestos louvers are located on wide centers on the sloping louvered walls. They are supported by tower columns and louver supports. ( FRP casing and louvers can be provide if desired.)

Internal Fills
Our cooling towers are fitted with “Foster Wheelers” stack type fill arrangement, comprising of splash bars fixed with transverse stringers making the fills into removable trays. This arrangement makes an excess to wet surface area and eliminates any chances of fill collapse. The splash bars and trays are made from As-Cu treated pinewood and are rectangular in cross-section.

Drift Eliminators
Specially designed eliminators are made in replaceable modules. Each module can be taken out easily, cleaned and put back into position in no time. Eliminates drift loss to less than 0.1%.

Cold water Basin & Other Works
The cold water RCC Basin is to be constructed by the purchaser, in accordance with the supplied drawings. The sting equipment, pumps, cabling,external piping are not included.

 Thank you

L K Chatuvedi
CEO - Wetpoint Aqua Equipments (P) Ltd
Manufacturer of all kind of Industrial Cooling Towers
Phone: +91-9302.214.784
Email: ceo@wetpointcoolingtowers.com

FRP Square Type Cooling Towers

Square Type Cooling Tower

Out cooling tower has following features:

• Must be for uniform water distribution and optimal heat transfer.
• Excellent resistance to corrosion can be achieved via fiber-reinforced plastic.
• These cooling towers must be compact and light in weight.
• These cooling towers must be easy to installation and maintain.

Our Square Type FRP Cooling Towers comprises of following parts:

Casing :
The tower casing is made of tough fibre-glass reinforced plastic (FRP) and has sufficient structure strength to withstand high wind velocities and vibrations. UV - stabilized resin is used along with gel coat for longer life.it is resistant to local impact and even if slight damage occurs, local repairs can easily be done. The portion of casing housing fill and eliminator has a round cross section. The water collection sump, also of FRP, is leak proof and avoids water spillage.
 

PVC Fills
The fill is of rigid Polyvinyl Chloride (PVC) and is of honeycomb design with very large contact surface area. The fill splits the air and water into several streams, increasing the time of contact and also heat transfer between water and air. The fill is in modules and is packed in the tower casing without ant cutting for curves. The air pressure drop through the fill is negligible. The fills are available with flute height of 12mm and 19mm with sheet thickness of 0.15 mm and 0.20 mm .

 

Sprinkler
Automatic rotary sprinkler system made of Aluminum alloy or cast steel material, with rotary head and sprinkler pipe distributes the hot water over the entire space of the filler. Sprinkler pipes are non-clogging, require low pressure to operate and assures uniform water flow with minimal operating pump head. The FRP eliminators attached to sprinkler pipe are specifically designed for low pressure drop and minimizes the drift loss of water.

  

Axial Fan
Specially designed energy efficient fans are of induced-draft axial type with adjustable pitch. Material chosen are non- corrosive of plastic, FRP or aluminum alloy. The high efficiency design ensures low running cost and the lowest possible noise level. Fan blade pitch is adjustable and dynamically balanced.

Motors
The motors are totally enclosed (IP55), Flange type , 420 V, 3 ph, 50 Hz., induction weather proof with extended shaft and are specially designed for cooling tower application.

We will be glad to have you valued inquiries. For more details and consulting on cooling towers please call us or drop us your mail.

Thank you

L K Chatuvedi
CEO - Wetpoint Aqua Equipments (P) Ltd
Manufacturer of all kind of Industrial Cooling Towers
Phone: +91-9302.214.784
Email: ceo@wetpointcoolingtowers.com

Leading Cooling Tower Manufacturers in India

Here I am pleased to mention that we have a wide range of Cooling Tower Manufacturers in India. Since 1947 India has built many industries like power plants, petroleum refineries, petrochemical plants, natural gas processing plants, food processing plants, semi-conductor plants. One of the industry is Cooling Tower Industry. The primary use of cooling towers is to remove the heat absorbed in the circulating cooling water systems used in the above mentioned industries and for other industrial facilities such as in condensers of distillation columns, for cooling liquid in crystallization, etc. I extent my article by mentioning the leading cooling tower manufacturers in India.

1) Paharpur

Paharpur has grown from a small lumber saw mill to one of the largest cooling tower manufacturers in the world. Paharpur have Research and Development centre which has consistently produced innovative concepts that have now become industry standards. Their engineering and production standards often exceed general standards, the objective being to supply a prime quality product which will provide low cost and reliable service to our customers over many years.

Industry they serve to:

• Electricity generating
• Petroleum refining
• Chemical processing
• Sugar
• Air-conditioning and
• Refrigeration
• Steel

2)  Wetpoint Aqua Equipments Pvt Ltd

Wetpoint Aqua Equipments Pvt. Ltd. is the largest manufacturer of cooling tower in central part of India. Our product range includes the Timber & FRP Induced Draught Cross flow & counter flow cooling towers which are designed and made as per particular process applications.

Wetpoint is in the business since 1996 and has professional approach towards system & documentation. Company policy is to design & manufacture the product to meet the requirement of the customer which would be able to delight him by good quality and better services.

They offers a wide range of cooling towers & spares for various applications like Air conditioning, DG sets, Compressors, Induction Furnace, Injection Molding Machines & various industrial processes. The capacities range from 5TR to 5000TR and the temperature ranges from 80 C to 30 C. We make use of all popular material like Double edge folded fill, FRP Fans, Plastic Sprinklers, PVC splash bars & Drift eliminators etc.

They have a long list of our satisfied customers all over India & abroad backed up with good after sales services WAEPL R&D Section is equipped with experienced engineers with advantage of AutoCAD & Pro-E. They are having experience in cooling tower technology, engineering assistance on basin construction, wiring piping and special cooling tower applications. Our experienced engineers has specialized knowledge to ensure a cooling tower selection that will produce optimum performance & economy for your exact need.

Whether you wish to cool the centralized air-conditioning plant of your building, dissipate heat from your processing plant or cool the water in your industrial complex, we at Wetpoint are at your service.

Industry they serve to:

• Electricity generating
• Petroleum refining
• Chemical processing
• Sugar
• Air-conditioning and
• Refrigeration
• Steel

3)  Mihir Cooling Tower

In pursuit of better and more efficient designs in FRP cooling towers, in 1992 Mihir Engineers Private Limited collaborated with the world leaders in this field – GEA Polacel of The Netherlands. The result of this collaboration was the rectangular shaped CM series counter flow type ‘Mihir Polacel FRP Cooling Towers’. These towers were manufactured using the latest technologies and computer based design techniques in engineering, over 18000 towers of various capacities are in operation in different fields of the industry.

Industry they serve to:

• Process Cooling
• Distillery
• Sugar Industry
• Power Plants

4)  North Street Cooling Towers (P) Ltd

North Street Cooling Towers (P) Ltd. was founded as a specialist in custom designed cooling towers for commercial and industrial purposes. The company has been at the forefront of the cooling tower industry since its inception in 1989. This has been possible due to great commitment to the company's goal, dedication for quality, united spirit for team work and working towards our aim for complete customer satisfaction. As we continue to meet the challenges of our customers for higher efficiency and greater volumes, we have developed our own manufacturing processes in our facility of 7200 sq.yards located in the National Capital Region, well equipped with all the latest machinery and highly trained workers to provide our customers with the best in the industry. We are constantly developing new and technologically innovative solutions for a dynamic industry where nature and technology converge.

Industry they serve to:

• Process Cooling
• Distillery
• Sugar Industry
• Power Plants

 

5)  PALTECH

PALTECH was founded in 1986 as a small Cooling Tower Manufacturing Company. With a dedicated and enthusiastic effort of Mr. H P Yadav, MD & CEO, the growth of the Company has been so rapid that today it is one of the leading manufacturers of Cooling Towers, Water Treatment Systems and Chilling Plants in the world.

The growth and expansion of the company took place simultaneously as the growing demand of customers had to be facilitated on a most priority basis. The company presently has an area of 1 Lac Sq.ft where huge manufacturing facility and a large warehouse have been established. This facility is located in Sohna, Haryana which has close proximity to Delhi as well as Gurgaon.

Industry they serve to:

• Process Cooling
• Distillery
• Sugar Industry
• Power Plants

Hope the above will be help full for your industrial needs.

Prahalad Rai
9669776202
RNB Infotech, Gwalior