Salient Features
L K Chatuvedi
CEO - Wetpoint Aqua Equipments (P) Ltd
Manufacturer of all kind of Industrial Cooling Towers
Phone: +91-9302.214.784
Email: ceo@wetpointcoolingtowers.com
Also visit us at our Facebook page
- Designed for uniform water distribution and optimal heat transfer.
- The special characteristic of fiber-reinforced plastic provide excellent resistance to corrosion.
- These cooling towers are compact and light in weight.
- These cooling towers offer easy installation and maintenance.
Casing :
The tower casing is made of tough fibre-glass reinforced plastic (FRP) and has sufficient structure strength to withstand high wind velocities and vibrations. UV - stabilized resin is used along with gel coat for longer life.it is resistant to local impact and even if slight damage occurs, local repairs can easily be done. The portion of casing housing fill and eliminator has a round cross section. The water collection sump, also of FRP, is leak proof and avoids water spillage.
The tower casing is made of tough fibre-glass reinforced plastic (FRP) and has sufficient structure strength to withstand high wind velocities and vibrations. UV - stabilized resin is used along with gel coat for longer life.it is resistant to local impact and even if slight damage occurs, local repairs can easily be done. The portion of casing housing fill and eliminator has a round cross section. The water collection sump, also of FRP, is leak proof and avoids water spillage.
PVC Fills
The fill is of rigid Polyvinyl Chloride (PVC) and is of honeycomb design with very large contact surface area. The fill splits the air and water into several streams, increasing the time of contact and also heat transfer between water and air. The fill is in modules and is packed in the tower casing without ant cutting for curves. The air pressure drop through the fill is negligible. The fills are available with flute height of 12mm and 19mm with sheet thickness of 0.15 mm and 0.20 mm .
The fill is of rigid Polyvinyl Chloride (PVC) and is of honeycomb design with very large contact surface area. The fill splits the air and water into several streams, increasing the time of contact and also heat transfer between water and air. The fill is in modules and is packed in the tower casing without ant cutting for curves. The air pressure drop through the fill is negligible. The fills are available with flute height of 12mm and 19mm with sheet thickness of 0.15 mm and 0.20 mm .
Sprinkler
Automatic rotary sprinkler system made of Aluminum alloy or cast steel material, with rotary head and sprinkler pipe distributes the hot water over the entire space of the filler. Sprinkler pipes are non-clogging, require low pressure to operate and assures uniform water flow with minimal operating pump head. The FRP eliminators attached to sprinkler pipe are specifically designed for low pressure drop and minimizes the drift loss of water.
Automatic rotary sprinkler system made of Aluminum alloy or cast steel material, with rotary head and sprinkler pipe distributes the hot water over the entire space of the filler. Sprinkler pipes are non-clogging, require low pressure to operate and assures uniform water flow with minimal operating pump head. The FRP eliminators attached to sprinkler pipe are specifically designed for low pressure drop and minimizes the drift loss of water.
Axial Fan
Specially designed energy efficient fans are of induced-draft axial type with adjustable pitch. Material chosen are non- corrosive of plastic, FRP or aluminum alloy. The high efficiency design ensures low running cost and the lowest possible noise level. Fan blade pitch is adjustable and dynamically balanced.
Specially designed energy efficient fans are of induced-draft axial type with adjustable pitch. Material chosen are non- corrosive of plastic, FRP or aluminum alloy. The high efficiency design ensures low running cost and the lowest possible noise level. Fan blade pitch is adjustable and dynamically balanced.
Motors
The motors are totally enclosed (IP55), Flange type , 420 V, 3 ph, 50 Hz., induction weather proof with extended shaft and are specially designed for cooling tower application.
The motors are totally enclosed (IP55), Flange type , 420 V, 3 ph, 50 Hz., induction weather proof with extended shaft and are specially designed for cooling tower application.
L K Chatuvedi
CEO - Wetpoint Aqua Equipments (P) Ltd
Manufacturer of all kind of Industrial Cooling Towers
Phone: +91-9302.214.784
Email: ceo@wetpointcoolingtowers.com
Also visit us at our Facebook page
No comments:
Post a Comment